Hardscapes & Hardscape Design & Installation

Concrete Contractors in Arlington TX

People from the DFW area know OmegaMasonry.Com is the concrete contractors to contact when in need of Brick Masonry service. OmegaMasonry.Com specializes in taking the skill of masonry, to the next level, and is the top Concrete Contractors in Arlington, TX.

Stamped concrete is a fairly popular choice for walkways these days. A lot of homeowners prefer to take advantage of it rather than using brick or stone pavers because it is more economical. Stamped concrete is also aesthetically pleasing as it comes in a wide variety of colors and patterns. Stamped concrete can mimic anything, from lumber to marbles. They are fairly easy to install and would easily blend into the appearance that you desire for your exteriors. Installing it is also a breeze. Compared to stone pavers that need to be set individually, this material merely has to be mixed, poured, and stamped. However, it does take an expert masonry contractor to get the job done. Just like any concrete structures, issues like untimely cracking, uneaven edges, and bad finish are a given.

The other drawback to stamped concrete is durability. Concrete will crack overtime, specially if it is exposed to weather changes. A heavy load is also a factor. So the place where stamped concrete is installed must also be taken into consideration. This is why stamped concrete is recommended for walkways but not on driveways. But when it comes to upkeep, stamped concrete wins. It is easy to clean and may essentially need less to zero maintenance at all. Nonetheless, contractors suggest that the concrete is sealed for increased protection.

Arlington, TX Professional Concrete Contractors

Like any other thing, there are advantages and disadvantages to using concrete and patio pavers for the outdoors. When deciding between these two materials, it’s best that you weigh all the possibilities first. It is necessary that you arrive at the best decision all the time. Here are a few points of comparison to consider:

  1. Aesthetics

Stamped concrete is basically more decorative as you are free to choose which shade, texture and design to use. The only limitation is your own creativity. Patio pavers, on the other hand, come in certain patterns. Despite that, you can always mix and match to reach the look that you desire.

  1. Durability

Stamped concrete is susceptible to cracking, specially if the weather outdoors is somehow irregular. Patio pavers, on the other hand, are technically thicker and stronger. They are not susceptible to cracking when installed correctly.

  1. Installation

The installation of these two materials requires a professional. Although almost everybody can play with pavers or concrete on their own, it can be impossible to achieve the perfect look and the maximum potential of the materials if they aren’t installed professionally.

  1. Upkeep

In the matters of repair and upkeeping, patio pavers win. Because they’re durable, they don’t have to be replaced too often. And when you have to, you only have to concentrate on the individual paver that is broken and not the entire walkway.

Arlington Concrete Contractors Blog Articles:

A Brick Wall Mason Explains Brick Damage Patterns

Masonry Services Dallas, Frisco, Mckinney, Prosper, Allen & Plano, TX - Natural Stone | Custom Brick | Cast Stone | Brick Repair | Retaining Walls

A brick wall is of rather rigid construction, meaning that as the foundation it resides on shifts and moves over time, it can become cracked or otherwise damaged. This can be true of any constructed brick wall, even ones erected by the most masterful brick wall mason. Unfortunately, time has a way of affecting all things, and brick walls are not excluded from that fact.

There are numerous factors that come into play, here. The material that the bricks are composed of, changes in temperature and moisture are the most common elements that contribute to brick wall damage. Cracking, spalling and efflorescence can impact the appearance and functionality of your brick walls.

Below, we will explain what these damage patterns are, and what they reveal about the environment’s impact on brick structures.

Cracking

Over the span of their career, a brick wall mason will see cracking occur in three different locations most of the time: above windows, in the field of the brick wall itself, or at the foundation. These occur for different reasons and require different methods of repair to prevent becoming bigger, more expensive issues.

A too-small lintel on a window head can cause the masonry work to deflect in the middle and cause a crack that spreads upwards. Uneven foundation settling can cause shifts (and therefore cracks) at any point along the expanse of brick wall. The expansion and contraction of brick and concrete at different rates can contribute to some pretty severe cracks at the foundation of a building that has brick walls.

Spalling

Spalling refers to the crumbling of bricks when pieces of a brick might begin to flake away and compromise the integrity of the brick that it came from. There are numerous causes of spalling, the most common culprits being:

  • Brick coatings placed over the bricks, which interferes with adequate drainage
  • Certain materials, like soft clay, that are more susceptible to water damages
  • Movement of the structure itself, like when a building settles upon its foundation
  • Excessive moisture, such as from powerful storms or high-pressure washing of the brick
  • Sand blasting of the masonry
  • The use of chemicals in cleaning masonry

How far this damage extends depends on how long the brick has been exposed and how porous the material of the brick is.

Efflorescence

When a white substance forms on any side of a brick, this is called efflorescence. Excessive moisture exposure causes this unsightly occurrence, as salts are collected when water enters the brick and becomes crystallized. Surface efflorescence can often be remedied with a simple scrubbing of the affected area, but efflorescence occurring in older buildings could be indicative of a bigger problem. If a building has been erected for a very long time and suddenly shows this crystallized formation on its surfaces, this suggests that there has been a long-standing moisture issue in the building.

The Role of a Brick Wall Mason

A certified, insured and reputable brick wall mason will be able to tackle efflorescence, spalling and cracking with professionalism and efficiency. As they have access to all of the tools of the trade as well as the knowledge to address and diagnose these problems with accuracy, masonry contractors are best suited for tackling these jobs. Attempting to repair some of the more problematic issues, like cracks along the foundation where the brick wall ends, you could cause bigger problems that will be more expensive to fix.

Related Searches for Concrete Contractors in Arlington, Texas

OmegaMasonry.Com thanks you for visiting our website please note that we also offer the following services:

Concrete Contractors in or near Arlington, TX

Concrete Contractors in or near Arlington, TX Ask anybody in and around the Dallas, DFW area, and surrounding counties, who is the contractor to employ when looking for Brick Mailbox Repair service, and they will answer, OmegaMasonry.Com. That is because OmegaMasonry.Com is the top Concrete Contractors in or near Arlington, TX and they specializes in taking the skill of masonry to the next level. Omega Masonry contractors are stone, brick, and concrete professionals. They [...]

2018-03-09T04:11:08+00:00