Commercial & Residential Concrete Repairs Contractors West Dallas TX2018-06-08T12:02:58+00:00

Commercial & Residential Concrete Repairs Contractors West Dallas TX

Hardscapes & Hardscape Design & Installation

In search of a commercial or residential concrete repair contractor in West Dallas, TX? For over 20 years OmegaMasonry.Com has been the contractor to go to for everybody in West Dallas searching for Mailbox Repair and or Retaining Wall Repair. While there is no shortage of concrete contractors in the West Dallas area I think you will approve with our reviews and testimonials. We say this because we have seen an uptick in the amount of low quality stone landscape borders work being done in the West Dallas area lately. If you contact OmegaMasonry.Com, you’re not only dealing with one of the best masonry companies in the West Dallas area but also an reputable business that is fully licensed and insured. As previously said there is a lot of cheap concrete crack repairs work being done around the West Dallas area and is important to point out that a bad concrete resurfacing is not something you on install or fix. In just about every case you are looking at a pricey demolition and rebuild. This is why Home Advisor and other home improvement portals always tell you to hire an expert concrete contractors near you!

Top Concrete Repairs Contractors in West Dallas, Texas

From Plano to Mesquite the demand for expert concrete crack repairs is pretty high. That is due in part to the fact that brick masonry and stone landscape borders have become a part of life throughout Texas. Other than metal few materials are capable of withstanding the test of time better than concrete. Given the Texas weather, having a outdoor grills or bbq pits makes a lot of sense. More often than not these types of architectural features will add value to any real estate property. And whether you’re looking to build something new and or driveway repairs hiring a top concrete repairs contractors in West Dallas, Texas, doesn’t have to be difficult. Simply call the experts at Omega Masonry. Trust us hiring a trustworthy concrete companies is your less-expensive option. It is human nature to-do everything we can to save money. Nevertheless, hiring a handyman to do your concrete crack repairs may cost you a lot more in the long run. And whatever you do, don’t decide exclusively based on reviews even those at FaceBook.Com as these can easily be spoofed by marketing agencies. If you want to find out more about concrete driveway repairs we encourage you to browse our blog. There you will find post not only about concrete driveway repairs but also stone & brick patios and more.

Article Relayed to Concrete Repairs Contractors West Dallas TX

What Is Stone Masonry?

Masonry Contractors Irving Texas

Stonemasons are craftsmen who work with stones to create homes, buildings and structures. They know how to manipulate, shape, polish and carve the stones into a specific design. This also includes stone features like the installation of retaining walls, chimneys, and patios. A stone masonry contractor is able to handle natural and manufactured stone to create different installations and even a home.

Types of Stone Masonry

There are two main classifications of stone masonry: rubble and ashlar masonry. In rubble masonry, the stones used are made up of widely different sizes. The stonemason can decide to leave the stones uncoursed or they can square them off with a straightcut finish. This is considered the cheapest and roughest form of stone masonry because the stones can be in random sizes. As for ashlar masonry, this is when each stone is cut into a uniform size and shape, while ensuring that it forms a rectangular shape. Each of the stone are chiseled to remove all unevenness and to obtain perfectly horizontal and vertical joints, making it easier to put all the stones together. Consequently, this type of stone masonry is very costly.

With that in mind, listed below are just some of the different methods of stone masonry construction.

  • Mortared stones. This method involves the use of cement mortars to stack and affix the stones together. The mortar fills the gaps between the stones, so this can be used for both rubble and ashlar masonry.
  • Dry-stack stones. Stone masonry actually originated from this technique, wherein stones were carefully lined up without mortar to build a structure. In this case, gravity serves as the mortar or glue that holds all the stones together. This technique was more challenging because it required more skill and time.
  • Veneered stones. This type of stone is commonly used as a protective and decorative covering for exterior and interior walls or surfaces. The reason for this is because the veneer is usually only 1 inch thick and must weigh less than 15 pounds per square foot so that no additional structural supports are needed. This type of stonework is not meant for building foundation; it is simply for show. In fact, most construction today consists of non-structured veneered stones against a structural wall of concrete or cinderblock to make it seem like the entire foundation was made out of pure stone.
  • Slipform stones. This method is considered a cross between traditional mortared stones and veneered stones. It involves the use of formwork to help contain the stones and mortar, while keeping it straight. Short forms about two feet tall are placed on both sides of the structure to serve as a guide. Once this is done, the stones are placed inside the short form where concrete will then be poured behind the rocks. With this, the structure is reinforced by both stones and concrete.

With all these different methods and techniques, it is clear that it takes a certain amount of skill to work in stone masonry construction.

We hope you liked the Commercial & Residential Concrete Repairs Contractors in West Dallas, TX, related article. As you can see whether you need concrete sidewalks repairs or putting together a new stucco work project, hiring the right concrete company for the job makes all the difference in the world. Here is another block related to concrete driveway repairs in Dallas. At  OmegaMasonry.Com we understand that a well educated homeowner is the best customer we can have.

How to Go About Cast Stones Repair

Masonry Contractors Arlington Texas

Cast stones are pre-cast concrete that imitates the appearance, texture, and functionality of natural stones. Instead of carving real stones for ornaments and trimmings, cast stones are used instead. Cast stone repair is necessary to maintain the natural look and appearance of these masonry applications.

Cast stones are man-made and pre-fabricated masonry products. They are specially installed by professionals who should also be well-versed about their proper repair and maintenance. Cast stone repair is as meticulous as its installation, which is why everything from installation to repair has to be done only by the experts.

Proper Handling of Cast Stones

When cast stones are not handled properly, cracks may develop. Loading and installing these masonry products have to be done with utmost care, or they won’t be able to serve their purpose. In the same way, they should be cleaned and repaired accordingly in order to prevent further damage. The corners and edges of cast stones are especially vulnerable to cracking because these areas are less dense than the others.

At times, spalls may also develop. Spalls occur at anchor posts where the stress is high. They may also be a result of improper setting, which usually happens when pry bars are used to position the stone. The weaker corners, edges, and parts of the cast stone break due to the increased pressure applied.

Cast Stone Repair Methods

Cast stone repair should be carried out as soon as there are signs of wear, tear, and damage on the concrete. There have been a lot of creative approaches in the maintenance and repair of cast stones although the most common methods are the following:

  1. Cleaning

Cast stone cleaning can easily be done using water and detergent. However, if these substances fail to remove the spots and stains in the concrete, more aggressive cleaners like acids should be used instead. But the use of these abrasive chemicals should only be done by a professional as they tend to dissolve the cement binders in the concrete, thus leading to more problems such as roughness and erosion.

  1. Architectural Coating

Cast stones that are severely soiled, discolored, and crazed should be sealed or coated using a pigmented sealer. Doing so will restore the natural look of the stone that has been lost due to a number of reasons although most of them are environmental factors. Cast stone sealing and coating should be performed once every five to ten years to preserve the natural beauty of concrete trimmings and ornaments.

  1. Patching

Patching is a method used to repair cracks on the surface of the stone. While this seems to be any other handyman’s job, it really isn’t. Patching should be done properly or it will merely fail. The patches should be applied properly in order to repair aesthetic and structural damage on the concrete.

These are the three most common cast stone repair methods being used today, although there are more advanced processes available, such as chemical injection, re-etching, and waterproofing. Broken cast stones should be repaired immediately to mitigate the damage and prevent much higher repair costs.

Services Related to Relayed to Concrete Repairs Contractors West Dallas TX