Brick or Stone Tuck Pointing Dallas County, Texas

Masonry Contractors Plano Texas

Business owners searching for tuck pointing in Dallas County, Texas, knows that Omega Masonry is the contractor they need to call. For more than 2 decades they has been the leading provider of quality masonry services that include everything from Outdoor Grills & BBQ Pits to Retaining Wall Repair. If you don’t know about tuckpointing, that is a procedure where two different colours are used in the mortar joints of brick and stone work to give the impression that very fine joint. The professional masons at OmegaMasonry.Com can help you with many different type masonry repairs including for brick or stone tuck pointing. More often than not masonry repairs are not as bad as they appear. Uncomplicated mortar repairs are often required on newer homes due to the lack of proper mixture of cement and sand. Left unattended this inexpensive fixes can grow into more expensive repairs. Quite frequently potential clients will contact us asking for tuck pointing repair quotes by what they really meant was “repointing” which means to place wet mortar into cut or raked joints to repair weathered joints in old masonry. These are words that are often exchanged but improper. However, regardless masonry repair or work you may required the OmegaMasonry.Com is ready to go to work for you. And that is because we are mainly known as a “Concrete Company in Arlington, TX.” we are a full service masonry company.

Tuckpointing Mortar Repair Dallas County, TX

Through time, small movements of our homes lead to cracking . At Omega Masonry very experience at removing mortar and installing correct , new mixture cleanly so no new residue is left. This is known as “re-pointing,” and sometimes “tuck pointing.” Re-pointing should be used whenever existing mortar joints show damage .375 inch or more from the face of the masonry. In some instances it can also used if the joints are visibly cracked or separated from the brick or stone wall. Re-pointing involves stripping the old joint mortar, repairing any damaged masonry and filling the joints with fresh, strength-tested and color-matched mortar. Nothing like our competition, Omega Masonry is what some I the business call a full-service masonry contractor who can repair brick, cast stone, concrete, granite, limestone, marble, plaster, sandstone, slate, terra cotta and other types of natural stone and stucco. As many DIY guys have discover masonry repairs is an art. It requires a lot of specialized equipped and caring craftsmen to do the job done right, and that’s where Omega Masonry’s experience comes into play! For more info on what Omega Masonry can do for you visit out blog.

Articles Realted to Tuck Pointing Dallas County, TX

Signs You Might Need Brick Wall Repair

Masonry Contractors Collin County Texas

When you see the exterior of your home every single day, it is hard to notice the little changes. This makes it challenging to keep the exterior of your home safe from damaged brick. Look out for the signs you might need brick wall repair If your brick is creeping up in age or if you have noticed any damage.

Do You Need to Brick Wall Repair?

If you have noticed a bowed wall, your brick is likely damaged and in need of repair. This damage can be caused by bricks that have absorbed moisture and therefore expanded, causing the bowing. The expansion actually breaks joints and places a lot of pressure on the center of the brick wall. If this damage is severe and one or more bricks have become dislodged, the repair will involve removing all bricks and rebuilding the wall.

A white substance on the surface of your bricks can also indicate damage. This substance is caused by efflorescence, which is the process wherein moisture draws salt out of the mortar and brick. This forms a slimy substance that, when evaporated, leaves the white powder behind. This powder indicates poor drainage or drying. While it is not damaging itself, it is a sign pointing to damage that is occurring on the inside. When efflorescence appears, our brick wall masons often suspect a clog in drainage somewhere within the wall. While this is usually the culprit, efflorescence can also result from damaged flashings and leaking pipes.

Diagonal cracking and sagging are also signs of damage. The cracking usually crops up along the corners of windows, while the sagging can be spotted in the middle of window headers. This can occur when the brick veneer system’s supporting shelf angles are deteriorating. These are steel pieces located on every floor and over windows. They are usually attached to concrete frames in order to provide the veneer support. They can also at times be around windows to support the window headers.

This damage is caused by either excessive moisture. Moisture causes shelf angles to corrode, dislodging them from their frame. When our brick wall masons repair this damage, they often use galvanized steel because it is more protected. They also sometimes incorporate soft joints for freer movement.

Likely the most obvious sign of deterioration would be missing mortar. Mortar is designed to be weaker than brick for a good reason, but this also means it will be the first to go. If the mortar is stronger than brick, moisture can be trapped behind the veneer. This promotes corrosion over time.

Speak to a contractor about tuckpointing when you notice your mortar missing or you sport the beginning of the deterioration process. Mortar joints will likely require brick wall repair every 15-20 years.

If you have noticed any of these signs on the exterior of your home, contact our office. You can then speak to a representative who can walk you through the process of scheduling brick wall repair with a trusted brick wall mason.

Services Related to Tuckpointing Mortar Repair Dallas County, TX