Tuck Pointing Lakewood, TX2018-04-14T21:20:50+00:00

Brick or Stone Tuck Pointing Lakewood, Texas

Masonry Contractors Coppell Texas

Families looking for tuck pointing in Lakewood, TX, knows that the only company they need to call is OmegaMasonry.Com. For over two decades OmegaMasonry.Com has been the leading provider of fine masonry services that include everything from Built in Grills & Outdoor Kitchen to Chimney Repair. If you are not familiar tuckpointing, that is a procedure where 2 contrasting colors are used in a mortar joints of brick walls in order to make it look like a thin joint. The seasoned masons at OmegaMasonry.Com can help you with all types of masonry repairs including for tuck pointing. Most of the time masonry repairs are not as critical as they appear. Newer homes require simple motor repairs due to bad workmanship. If you ignore a simple tuck pointing repair can turn into a major project. Quite often clients will reach out to us asking for simple tuck pointing repair estimates by what they really meant was “pointing” which means to correct defects or finish off joints in newly laid masonry. These are words that are often substituted but improper. In either case, no matter the type of masonry repair or work you may required the Omega Masonry is ready to start working for you. And that is because we are more known as a “Chimney Repair in Plano, TX.” we are a full service masonry company.

Tuckpointing Mortar Repair Lakewood, TX

After many years, small movements of our homes lead to cracking . At OmegaMasonry.Com masters in removing mortar and installing correct , rich mortar cleanly so no residue is left. This procedure is called “re-pointing,” and at times “tuck pointing.” Re-pointing should be considered when existing mortar joints show damage .375 inch or more from the face of the stone. In some instances it is used if the joints are cracked or separated from the masonry units. Re-pointing entails removing the old joint mortar, repairing any damaged stone and refilling the joints with fresh, strength-tested and color-matched mortar. Unlike other masonry contractors in the Lakewood area, OmegaMasonry.Com is what some I the business call a full-service masonry contractor that can repair brick, cast stone, concrete, granite, limestone, marble, plaster, sandstone, slate, terra cotta and other types of natural stone and stucco. As many DIY guys have discover masonry repairs is an art. It requires a lot of specialized equipped and expert craftsmen to get the job done right, and that’s where OmegaMasonry.Com’s experience come in! For additional on what Omega Masonry can do for you check out out blog.

Blog Realted to Tuck Pointing Lakewood, Texas

When Do You Need Concrete Repair?

Maintenance, Repair and Replacement of Historic Cast Stone

A common question that the client asks is whether or not they should replace or repair their concrete. The good news is that most concrete repair work has made great strides in its respective field over the past few decades, which is why it is often cheaper and even more environmentally friendly. So contact us for a consultation when you see any cracks or issues with your patio, driveway, etc. Our highly-experienced team will be able to identify if it can be rectified by a simple repair.

Once you have made your decision to repair the concrete, there are still some other factors to decide. Will you simply repair the damaged (cracks, potholes, etc.), or renovate the entire slab of concrete in order to maintain some level of uniformity? Damage assessment is an integral factor in this selection process.

Fortunately, Omega Masonry specializes at concrete installation and repair jobs. We ensure that you get the best advice in regards to choosing the type of concrete repair as well as the myriad of other decisions you have to make as the client.

Types of Concrete Repair

At Omega Masonry, we offer a wide array of concrete repair services. 

Epoxy Injection: This method is utilized in residential and industrial concrete repair, as it is designed for fixing small cracks in the concrete (0.05 mm). It involves the injection of a flexible adhesive (epoxy) into the fault in the concrete through the entry port that was previously drilled into the concrete. Although it is used for repairing large structures like buildings and bridges, cracks have been known to recur near the sight of the epoxy injection. This is why epoxy injection is a delicate process that requires a lot of skill and experience in order to achieve a satisfactory outcome. This should be taken into account when selecting the method of concrete repair.

Stitching (Cross Stitching): If you choose this method, we will be drilling holes on both sides of the crack in order to grout U-shaped pieces of metal with short legs (staples/stitching dogs) that will cover the crack in its entirety. The holes made in the concrete will then be cleaned, and the staples bonded into the concrete through a bonding adhesive or non-shrink grout. It’s important to note that this is typically utilized for longitudinal cracks which appear to be in relatively good condition.

The Drill and Plug: This method is mostly used for vertical cracks, i.e. cracks that are accessible only from one side. A hole ( 50 to 75 mm in diameter ) will be drilled into the center of the crack. A grout key ( a fluid ) will fill the gaps in order to prevent the concrete around the crack from moving or worsening the crack. If you wish to avoid water leakage at all costs, then we will fill the gaps with an alternative to grout.

These are just some of the many methods for concrete repair, and our team will be more than happy to suggest other methods during your consultation with us.

Searches Related to Tuckpointing Mortar Repair Lakewood, Texas