Brick or Stone Tuck Pointing Murphy, TX

Masonry Contractors Parker Texas

Families looking for brick or stone tuck pointing in Murphy, TX, knows that Omega Masonry is the only company they need to contact. For over twenty years they has been the leading provider of premium masonry services that include everything from Outdoor Fireplace & Fire Pits to Stone Landscape Borders. If you are not familiar tuckpointing, that is a procedure where two contrasting colors of mortar are used in a mortar joints of brick walls in order to give the impression that very fine joint. The expert craftsman at Omega Masonry can help you with many different type masonry repairs including for tuck pointing. Most of the time stone repairs are not as bad as they appear. Newer homes require simple motor repairs due to cheap craftsmanship. If you ignore a simple tuck pointing repair can turn into a major project. Every once in a while clients will reach out to us asking for tuck pointing repair estimates by what they really meant was “pointing” which means to correct defects or finish off joints in newly laid masonry. These are words that are often substituted but not proper. However, no matter the type of masonry repair or work you may required the Omega Masonry is ready to go to work for you. And that is because although we are mainly known as a “Concrete Contractors in McKinney, TX.” we are a full service masonry company.

Tuckpointing Mortar Repair Murphy, TX

Through time, small movements of our homes lead to cracking . At OmegaMasonry.Com masters at removing mortar and installing correct , new mortar cleanly so no new residue is visible. This procedure is known as “re-pointing,” or at times “tuck pointing.” Re-pointing should only be used when existing mortar joints show damage .375 inch or more from the face of the stone. In some cases it can used when the joints are visibly cracked or separated from the masonry units. Re-pointing entails removing the old joint mortar, repairing any damaged masonry and filling the joints with fresh, color-matched mortar. In contrast our competition, Omega Masonry is what a lot of people call a full-service masonry contractor that can repair brick, cast stone, concrete, granite, limestone, marble, plaster, sandstone, slate, terra cotta and other types of natural stone and stucco. As many weekend warriors have discover masonry restoration is like an art. It requires well trained crew and expert craftsmen to get the job right, and that’s where our expertise’s comes into play! For more information on what OmegaMasonry.Com can do for you visit out blog.

Blog Post Realted to Stone Tuck Pointing Murphy, Texas

How to Go About Cast Stones Repair

Masonry Contractors Princeton Texas

Cast stones are pre-cast concrete that imitates the appearance, texture, and functionality of natural stones. Instead of carving real stones for ornaments and trimmings, cast stones are used instead. Cast stone repair is necessary to maintain the natural look and appearance of these masonry applications.

Cast stones are man-made and pre-fabricated masonry products. They are specially installed by professionals who should also be well-versed about their proper repair and maintenance. Cast stone repair is as meticulous as its installation, which is why everything from installation to repair has to be done only by the experts.

Proper Handling of Cast Stones

When cast stones are not handled properly, cracks may develop. Loading and installing these masonry products have to be done with utmost care, or they won’t be able to serve their purpose. In the same way, they should be cleaned and repaired accordingly in order to prevent further damage. The corners and edges of cast stones are especially vulnerable to cracking because these areas are less dense than the others.

At times, spalls may also develop. Spalls occur at anchor posts where the stress is high. They may also be a result of improper setting, which usually happens when pry bars are used to position the stone. The weaker corners, edges, and parts of the cast stone break due to the increased pressure applied.

Cast Stone Repair Methods

Cast stone repair should be carried out as soon as there are signs of wear, tear, and damage on the concrete. There have been a lot of creative approaches in the maintenance and repair of cast stones although the most common methods are the following:

  1. Cleaning

Cast stone cleaning can easily be done using water and detergent. However, if these substances fail to remove the spots and stains in the concrete, more aggressive cleaners like acids should be used instead. But the use of these abrasive chemicals should only be done by a professional as they tend to dissolve the cement binders in the concrete, thus leading to more problems such as roughness and erosion.

  1. Architectural Coating

Cast stones that are severely soiled, discolored, and crazed should be sealed or coated using a pigmented sealer. Doing so will restore the natural look of the stone that has been lost due to a number of reasons although most of them are environmental factors. Cast stone sealing and coating should be performed once every five to ten years to preserve the natural beauty of concrete trimmings and ornaments.

  1. Patching

Patching is a method used to repair cracks on the surface of the stone. While this seems to be any other handyman’s job, it really isn’t. Patching should be done properly or it will merely fail. The patches should be applied properly in order to repair aesthetic and structural damage on the concrete.

These are the three most common cast stone repair methods being used today, although there are more advanced processes available, such as chemical injection, re-etching, and waterproofing. Broken cast stones should be repaired immediately to mitigate the damage and prevent much higher repair costs.

Services Related to Tuckpointing Mortar Repair Murphy, TX